CATALOG 53

ADHESIVES West System Adhesives

JANTZ SUPPLY ★ 1-800-351-8900 ★ WWW.KNIFEMAKING.COM

West System Pump Set

105/206 Epoxy

Epoxy

Designed for convenient and accurate metering of #105 resin and #206 hardener. Calibrated to delivery approximately 0.8 fl oz of resin / hardener with one full stroke. Set contains one resin pump and two hardener pumps which mount directly on the containers eliminating mess and waste. Read and follow priming, ratio verification, and operating instructions included with pumps. CAT.# DESCRIPTION PRICE WE300 Pump Set 15.69 West System Color Pigments

Devcon Epoxy in the Dev-tube, gives you correct amounts of resin and hardener automatically, no measuring required. The high-strength 2-ton epoxy is waterproof, bonds wood, metals, micarta, stag, Dymondwood, virtually any knife part with a crystal clear finish that cures at room temperature in about 30 minutes. Made to withstand high impact and high-stress situations. Available in 1 oz. syringe or 9 oz. bottles. The five minute epoxy has the same features as the 2-ton, but sets up much faster with only slightly less strength. Can Not Ship 2-Ton Epoxy Air. CAT.# SIZE DESCRIPTION PRICE DVE5 1 oz. 5 minute Syringe 3.49 DVE30 1 oz. 2-Ton Syringe 3.49 DVE33 9 oz. 2-Ton bottle (2) 11.95 DVE59 9 oz. 5 min. bottles (2) 12.95 Acraglas and acraglas gel provide the professional or amateur with an easy to use superior bedding compound, specifically designed and manufactured to make your rifle shoot more accurately. Also great to use as a fill-in for stone material “inclusions” or cracks. Fills cracks and blemishes in wood knife handles, works as an epoxy to hold handles on. Brown and black dye is included in both kits. Bedding Compounds

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adequate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70°F with a minimum cure temperature of 60°F. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing. CAT.# DESCRIPTION PRICE WE105A 1 qt #105 Resin 39.71 WE105B .98 Gallon #105 Resin 99.73 WE206A .44 pt #206 Slow Hardener 20.50 WE206B .86 Quart #206 Slow Hardener 46.06

Epoxy based liquid colorants used to tint epoxy mixture and provide an even color base for the final finish system. Add to mixed resin/ hardener at a rate of approx. 1 tsp of pigment to 8 fluid oz

G/Flex ® Epoxy

epoxy. More pigment increases opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1-1/2 gallons of epoxy. CAT.# COLOR PIGMENT PRICE WE5018 White 17.95 WE5028 Black 17.95 WE5038 Gray 17.95

System Three

Epoxy Paste Pigment

G/flex epoxies are toughened, resilient two- part epoxies engineered for superior grip to metals, plastics, glass, masonry, fiberglass, and difficult to bond woods. G/flex epoxies make bonds that absorb the stresses of expansion, contraction, shock and vibration. Easy-to-use 1:1 mix ratio gives you 46 minute pot life and a working time of 75 minutes at room temperature. Initial cure in 3-4 hours with workable cure in 7-10 hours. CAT.# DESCRIPTION PRICE WE6508 G/Flex Liquid 4 oz. 22.49 WE6558 G/Flex Pre-Thickened 4.5 oz. 24.65

Acraglas shrinks less than 1/10 of 1%, strengthens wood, simplifies inletting in semi inletted stocks, slow set-up allows ample time to seat barrel & action. Acid and water proof, seals inletting. Kit contains everything needed to bed 2 rifles or lots of knife handles. Can Not Ship Air. CAT.# DESCRIPTION PRICE BWA Acraglas Kit 18.99

Pure, dry, colored pigments can be used alone or mixed to produce additional colors to suit any project where color is desired. Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use – only add hardener when you are ready to use.

5 Minute Adhesive

Gel

CAT.# SE12 SE22 SE32 SE42 SE52 SE62 SE72 SE14 SE24 SE34 SE44 SE54 SE64 SE74

COLOR White Black Brown Blue Yellow Green Red White Black Brown Blue Yellow Green Red

SIZE PRICE

14.95 14.95 14.95 14.95 27.95 18.95 18.95 17.95 17.95 17.95 21.95 39.95 27.95 27.95

2 oz. 2 oz. 2 oz. 2 oz. 2 oz. 2 oz. 2 oz. 4 oz. 4 oz. 4 oz. 4 oz. 4 oz. 4 oz. 4 oz.

Easy-to-use, fast curing epoxy system for quick repairs, tooling and general bonding. Use for spot application to hold parts in place while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. 1:1 mixture. Cures in 3-5 minutes. 4 fl. oz resin and 4 fl. oz hardener. CAT.# DESCRIPTION PRICE WE8654 5 Minute Adhesive 21.48

Acraglas gel has all the features of Acraglas, plus it shrinks slightly less and the butter smooth consistency prevents runs and mess. Kit contains enough to bed 2 rifles. Can Not Ship Air. CAT.# DESCRIPTION PRICE BWAG Acraglas-Gel Kit 21.99

PAGE 71

PRICES SUBJECT TO CHANGEWITHOUT NOTICE