Jantz Catalog 51

END MILLS End Mills Miniature 2 Flute

WWW.KNIFEMAKING.COM ★ 1-800-351-8900 ★ JANTZ SUPPLY

135 ° Split Point Cobalt Drills

Carbide Drills

Cobalt provides better wear resistance in hardness and toughness compared to HSS. Extended tool life and hole size accuracy in tough to drill materials such as titanium, annealed steel and G10. 135° Self-centering split point prevents "walking".

Drill the proper size hole with these heavy duty, jobber length, 135° split point metric drills. Our metric tap section lists drill size for tapping and clearance. Decimal sizes are listed so you can choose the best “close slip” fit for both inch and metric size pins. CAT.# SIZE DECIMAL PRICE TM18 1.8mm .0709 1.58 TM19 1.9mm .0748 1.58 TM20 2.0mm .0787 1.50 TM24 2.4mm .0945 1.50 TM25 2.5mm .0984 1.50 TM29 2.9mm .1142 1.50 TM30 3.0mm .1181 1.50 TM32 3.2mm .1260 1.58 TM33 3.3mm .1299 1.58 TM38 3.8mm .1496 1.75 TM42 4.2mm .1654 1.82 TM43 4.3mm .1693 1.82 TM50 5.0mm .1969 2.50 TM53 5.3mm .2087 2.53 TM63 6.3mm .2480 3.13 TM64 6.4mm .2520 3.42 Center drills are used in a drill press, milling machine or lathe to start the hole to be drilled. The large body diameter and small drill size make them extremely rigid, thus eliminating any flex or ‘walk’ you will experience with other drills. Use to start the hole and to drill ‘centers’ on stock to be turned in a lathe. DRILL BODY CAT.# SIZE DIA. DIA. PRICE HA1 1 3/64" 1/8" 4.86 HA2 2 5/64" 3/16" 4.86 HA3 3 7/64" 1/4" 4.95 HA4 4 1/8" 5/16" 4.95 HA6 6 7/32" 1/2" 6.95 Designed to drill through hard-to-drill materials such as hardened receivers and hardened knife blades. Fractional sizes are usually used for drilling pin, rivet and thong holes in blade tangs while the #28 and #31 are used for drilling receivers for scope mounts. For better results and longer drill life, run at speed specified for each size. Carbide drills are very brittle and must be used with great care. No warranty on this item. Made in the USA. CAT.# SIZE DEC. RPM PRICE TD604 1/16" .0625 2400 11.95 TD606 3/32" .0937 2400 13.95 TD608 1/8" .1250 1600 15.48 TD612 3/16" .1875 1200 22.95 TD613 5/32" .1562 1200 20.46 TD614 7/32" .2187 1000 29.23 TD615 5/64" .0781 1600 12.66 TD616 1/4" .2500 800 32.95 TD617 3/8" .3750 700 37.83 TD712 12 .1890 1200 26.95 TD728 28 .1405 1400 18.54 TD730 30 .1285 1600 17.40 TD731 31 .1200 1600 17.18 TD743 43 .0890 1600 14.95 TD733 3mm .1181 1600 17.07 Metric Drills Center Drills

2-Flute HSS center cutting double end. CAT.#

SHANK SIZE PRICE

TL355 TL356 TL357 TL358 TL359

15.81 15.81 15.81 15.81 15.81

3/16" 3/16" 3/16" 3/16" 3/16"

1/16" 3/32" 5/32" 3/16" 1/8"

CAT.#

SIZE DECIMAL PRICE

TC0937

1.99 2.19 2.49 2.49 2.99 3.19 3.59 4.29 4.99 6.49

3/32"

.0937" .0960" .1250" .1285" .1562" .1590" .1875" .1890" .2500" .2570"

TC41

# 41 1/8" # 30

End Mills 2 Flute

TC1250

TC30

TC1562

5/32"

TC21

# 21

TC1875

3/16"

TC12

# 12 1/4"

TC2500

TCF

F

2-Flute HSS center cutting single end. CAT.#

Straight Flute Reamers

SHANK SIZE PRICE

EM201 EM202 EM203 EM204 EM205 EM206

12.95 12.95 12.95 12.95 12.95 14.95

3/8" 3/8" 3/8" 3/8" 3/8" 1/2"

1/8"

3/16"

1/4"

5/16"

3/8" 1/2"

Reamers are the perfect solution for finishing an existing hole to a specific size and tolerance. A must when properly fitting hinge pins to folders. Reamers work best when used in a drill press or lathe.

End Mills 4 Flute

CAT.#

FRACTION DECIMAL PRICE

RA0937 RA1240 RA1245 RA1250 RA1255 RA1260 RA1560 RA1562 RA1570 RA1575 RA1580 RA1865 RA1870 RA1875 RA1880 RA1885 RA2495 RA2500 RA2505 RA2510

10.50 10.50 10.50 10.50 10.50 10.50 11.95 11.95 11.95 14.12 12.95 13.95 13.95 13.95 13.95 13.95 15.95 15.95 15.95 15.95

3/32"

.0937" .1240" .1245" .1250" .1255" .1260" .1560" .1562" .1570" .1580" .1865" .1870" .1875" .1880" .1885" .2495" .2500" .2505" .2510"

4-Flute HSS center cutting single end. CAT.#

SHANK SIZE PRICE

1/8"

EM401 EM402 EM403 EM404 EM405 EM406

12.95 12.95 12.95 12.95 12.95 15.95

3/8" 3/8" 3/8" 3/8" 3/8" 1/2"

1/8"

3/16"

1/4"

5/16"

5/32"

3/8" 1/2"

4mm .1575"

Hand Reamer/Countersink

3/16"

Ideal for countersinking wood, plastic, and polymers or deburing plastic, copper, iron, pipe, and other metals. Heavy duty handle, 3/4" five-flute tool steel cutter, 5 1/8" overall. CAT.# DESCRIPTION PRICE GN196 Reamer/Countersink 10.25

1/4"

Pin Reamers

Countersink

Pin reamers are turned by hand to taper a pin hole so the pin can be peined to expand to the tapered hole for a strong hold. Can also be used to enlarge undersize holes. The reamers are tapered .005" per 1/4". Must use Tap and Reamer Wrench #RA712 sold separately. PIN TAPER SIZE LENGTH CAT.# SIZE MIN. MAX OF CUT PRICE RA703 3/32" .072" .096" 1-3/16" 19.95 RA704 2.5mm .087" .114" 1-5/16" 19.95 RA705 3mm .103" .130" 1-5/16" 19.95 RA706 1/8" .114" .146" 1-9/16" 19.95 RA712 Tap and Reamer Wrench 9.95

The rose pattern flutes assure chatter free countersinking of steel, brass, aluminum, plastic, wood, and more. High speed steel with five flutes. 82° point angle 1/4" shank. CAT.# DESCRIPTION PRICE GN195 1/2" Countersink 11.95

Tool and Instrument Oil

Zero Flute Countersink

Highly colorless, lubricates close-fitting parts at high temperatures and below zero. Insures maximum protection and lubrication of working parts. CAT.# DESCRIPTION refined,

The zero flute 82° countersink is the proper tool to countersink the flat head Torx screws used in folder kits The single cutting edge cuts chatter free, also used to debur and chamfer predrilled holes. CAT.# DESCRIPTION PRICE RA600 Zero Flute Countersink 12.95

PRICE

ST1620

7.59

3 1/4 oz. Tool/Instrument Oil

PAGE 90

PRICES SUBJECT TO CHANGEWITHOUT NOTICE