Jantz Catalog 52

HEAT TREAT Simple to use; place blade or other part in the Tool Steep Wrap; fold over and crimp edges forming an air tight package; place package in oven and heat treat according to metal directions. Placing a small chip of wood inside the foil packet helps to burn up oxygen inside the wrap. Use only once. Cuts easily with scissors. Heat Treating Foil

WWW.KNIFEMAKING.COM ★ 1-800-351-8900 ★ JANTZ SUPPLY

Rampmaster Option

The optional Rampmaster Control offers 12 settable programs, numerical keypad and alarm function. The KF010 is the option to exchange one of the Evenheat ovens from Set Pro Control to the Rampmaster Control at the

KF Series 240 v

time you are ordering an oven. CAT.# DESCRIPTION

PRICE

KF010

90.00

Rampmaster Control Option

Heat Treat Accessories

Sold in box of .002" x 12" x 25'. CAT.# DESCRIPTION

PRICE

Evenheat Knife Ovens are equipped with the easy to use Set-Pro Temperature Control, you can control up to 8 separate temperature points per firing. With features like 3 button operation, “Full Power” settings and a Skip function. Store up to 4 individual programs each capable of holding up to 8 segments. Control the rate of increase as well as the rate of decrease, also has a “hold/soak” time for each of the set point temperatures in each segment. Adjust the time and temperature in increments of 5 degrees and 5 minutes while your program is running without the need to stop and restart. You can skip to the next segment if you find your current process is finished before you anticipated. Available in four sizes, all models measure 10" width x 6.5" height inside chamber. Maximum temperature is 2200 degrees F.-all are 240 volt, single phase. Actual shipping charges apply. Allow 14 days for shipping. CAT.# DEPTH SHIPWT. PRICE KF135 13.5" 70 LBS 968.00 KF180 18.0" 100 LBS 1004.00 KF225 22.5" 110 LBS 1047.00 KF360 36.0" 160 LBS 2075.00

KF321 KF309

47.95 64.95

1900˚ 321 Heat Treat Foil 2200˚ 309 Heat Treat Foil

NC Tool Knifemaker Forge

Equipped with insulated doors on both ends for easy entry and removal of Damascus billets. Comes fitted for propane, but can be configured for natural gas. Regulator and Hose included, operates off a standard 20lb propane tank, the same type used for barbecue grills. Reaches

This kit contains all of the handling equipment you need to get started. No matter what oven you choose, you will want to add this kit so everything will be ready for your first heat treating experience. Includes Hot Mill Gloves (withstands up to 500°F.), heat treat fork, two knifeholders and four firebrick supports. CAT.# DESCRIPTION PRICE KF603 Heat Treat Accessory Kit 69.95 KF621 Heat Treat Fork 24.95 KF632 Knifeholder (each) 9.95 KF631 Firebrick support (each) 4.95 KF644 Hot Mill Gloves size 10 19.95

Aluminized Gloves

2350 degrees. The heat Chamber is 4" x 4 1/2" x 13 1/2". Exhaust port on one door is 3" x 2". Ship weight is 48 lbs. Actual shipping charges apply. CAT.# DESCRIPTION PRICE NC111 Knifemaker Forge 559.95

These gloves use a 22 oz Aluminized Thermonol coating to reflect 95% of the radiant heat from the back of the hand and arm. The palm material can withstand intermittent handling from 800 to 1000 degrees F. These 14" gloves are lined with 11 oz wool and use a Kevlar thread for the stitching. Made in the USA. CAT.# DESCRIPTION PRICE KF645 Aluminized Heat Resistant Gloves 79.95

Forging Anvil

Heat Protection Gloves

Quality alloyed castings, our 70 lb. anvil is precision milled and heat treated. A 3 1/2" x 11" face and 4" x 8" horn. Perfect for forging Damascus. Actual shipping charges apply on the Anvil.

Keep the heat away with these 14" gloves are lined with 11 oz wool and have a specialized coating of 35 oz

The Ultimate Heat Treating Furnace for Knife Makers. All are equipped with a simple to master SENTRY 12 key electronic temperature controller, which displays messages to guide you through each step in entering correct parameters for each job. A segment heats to a given temperature (max 2350˚ F) and rate, holds for as long as needed. You can enter up to 18 segments. Control both heating and cooling with accuracy and repeatability. Store up to 4 programs in memory, one for each type of steel you regularly treat. The large display shows temp throughout heating and cooling process. A delay feature turns the furnace on after a specified period. The alarm sounds when a programmed temperature is reached. Available in 3 sizes KF514 is 120 volt, 10 amp, 1200 watts, KF524 is 240 volt, 7.5 amp, 1800 watts, the KF536 is 240 volt, 11 amp, 2700 watts. All are 5.5" wide and 4.5" high. All dimensions are inside chamber measurements. Actual shipping charges apply. Allow 14 days for shipping. CAT.# DEPTH SHIPWT. PRICE KF514 14.5" 100 LBS 1099.00 KF524 24.0" 140 LBS 1340.00 KF536 36.0" 190 LBS 1523.00

CAT.# DESCRIPTION

PRICE 274.95

NC207

Forging Anvil

highly textured silica yarn treated to withstand temperatures up to 2000 degrees F. The outer material dissipates heat across the surface of the fabric. The fabric is made of inorganic materials, so it won't smolder or produce hazardous outgasses. CAT.# DESCRIPTION PRICE KF646 Heat Protection Gloves 79.95

Forging Hammers

Hammers are perfectly balanced. One end round, crowned face, other is flat and beveled to reduce the possibility of chipping.

Blade Fixtures

KF 689

CAT.# DESCRIPTION

PRICE

NC770 NC772

49.95 49.95

1 1/2 lb. Hammer

KF 688

2 lb. Hammer

Heat Treating Tongs

Evenheat Blade Fixtures are designed to hold your blades vertically and securely. They're well designed and provide ample space for foil inflation while being absolutely stable. The KF688-(5"x5"x2") is used in our KH Series (120vt) and the KF689-(7"x7"x2") is used in our KF Series (240vt).

Manufactured from special low carbon steel for lasting strength. Will not become brittle when quenched in water. The tongs are 15" overall.

CAT.# KF688 KF689

DESCRIPTION

PRICE

CAT.# DESCRIPTION

PRICE

22.95 29.95

MK1 Blade Fixtures MK2 Blade Fixtures

KF901

39.95

Heat Treating Tongs

PAGE 40

PRICES SUBJECT TO CHANGEWITHOUT NOTICE