Jantz Catalog

ATP-641 ★ FOIL ★ ANVIL ★ HEAT PROTECTION ★ HAMMER ★

ATP - 641 Anti-Scale Coating for Heat Treat

NC Tool Knifemakers Anvil

Hot Mill Gloves

Larger Flat Work Surface

Liquid anti-scale compound can be sprayed, flow coated, brushed or dipped onto your knife blade to minimize the formation of oxide scale and drastically reduce pitting and decarb loss during heat treat. Reduce re-work time after heat treat with the fantastic option to foil wrapping. Has a hot working range of 1000° to 2300° Fahrenheit, crumbles on cooling, and parts rinse clean in hot water.

Front and back heat-insulated style Nitrile Coated hot mill gloves for protection and comfort in moderate heat applications. Non woven felt insulation and a full-length, 14" heat barrier protect the worker. Comfortable and flexible large size 10, designed for intermittent handling of medium hot objects up to 400 ˚ F. CAT.# DESCRIPTION PRICE KF644 Hot Mill Gloves size 10 24.95

Still the classic, traditional design with a few modifications done specifically for the knifemaker. •Face is the large flat slab where most of the hammering takes place. •Square Cliphorn allows the smith to hammer different curves into the metal. •1” Hardie hole in heel, square hole through the anvil that allows you to secure various tools in the anvil or used for an aid in bending. •Pritchel hole in heel, round hole used in punching holes through the metal. Face: 3-1/4” x 11- 3/8”, Horn: 4” x 8”, Height : 9”, Base: 9” x 9-1/8”, Shipping weight: 76 lbs. Actual Shipping Charges Apply

CAT.# AP111 AP112

DESCRIPTION Anti-Scale Pint Anti-Scale Quart

PRICE

21.95 40.95

Heat Treating Tongs

Heat Treating Foil

PRICE 395.00

CAT.# NC205

DESCRIPTION

Manufactured from special low carbon steel for lasting strength. Will not become brittle when quenched in water. The tongs are 15" overall.

Knifemakers Anvil

CAT.# KF901

DESCRIPTION Heat Treating Tongs

PRICE

NC Tool Forging Anvil

49.95

Jim Poor uses a 3 step process to assure the highest quality hammer you can buy. They are tempered back to be slightly softer through the bodies, and then hardened only on the striking ends resulting in less vibration, and shock, with each blow of the hammer. Jim Poor has designed the handles to be slightly longer than most so the user can cut them off to the desired length. Keep in mind that handles add some weight to the hammer. The heavier the hammer, the larger the body and faces. Forging Hammers- Premium

Simple to use; place blade or other part in the Tool Steel Wrap; fold over and crimp edges forming a air tight package; place package in oven and heat treat according to metal directions. Placing a small chip of wood inside the foil packet helps to burn up oxygen inside the wrap. Use only once. Cuts easily with scissors. Sold in box of .002" x 12" x 25'

Quality alloyed castings, our 70 lb. anvil is precision milled and heat treated. 4" x 6" face, 3 1/4" x 8" horn and 3 1/4" x 5" heel. Height 8 3/4", base 11" x 9". Perfect for forging Damascus. MADE IN USA Actual shipping charges apply on the Anvil.

CAT.# KF321 KF309

DESCRIPTION

PRICE

92.95 96.95

1900 ˚ 321 Heat Treat Foil 2200 ˚ 309 Heat Treat Foil

Aluminized Gloves

Rounding

CAT.# NC208

DESCRIPTION Forging Anvil

PRICE 425.00

Emerson Forging Anvil

These gloves use a 22 oz Aluminized Thermonol coating to reflect 95% of the radiant heat from the back of the hand and arm. The palm material can withstand intermittent handling from 800 to 1000 degrees F. These 14" gloves are lined with 11 oz wool and use a Kevlar thread for the stitching. Made in the USA. CAT.# DESCRIPTION PRICE KF645 Aluminized Heat Resistant Gloves 89.95

The perfect choice for shaping metal and drawing out your steel. Rounding hammers allow you to draw out steel faster than a flat faced hammer.

CAT.# JP101 JP102

DESCRIPTION

PRICE 212.95 212.95

1.50 lb. Rounding Hammer 2 lb. Rounding Hammer

100lb

150lb

200lb

FACE 12 5/8" x 4"

FACE 16 3/4" x 4 3/16"

FACE 17 1/2" x 4 1/4"

Cross Pein

Heat Protection Gloves

HORN 8 1/2"

HORN 10 3/16" HEIGHT 11 3/8"

HORN 10 1/2" HEIGHT 12"

HEIGHT 10"

BASE 8 3/4" x 9"

BASE 10 3/8" x 9 7/16"

BASE 10 1/4" x 12 1/2"

Keep the heat away with these 14" gloves. They are lined with 11 oz wool and have a specialized coating of 35 oz highly textured silica yarn treated to withstand temperatures up to 2000 degrees F. The outer material dissipates heat across the surface of the fabric. The fabric is made of inorganic materials, so it won't smolder or produce hazardous outgasses. CAT.# DESCRIPTION PRICE KF646 Heat Protection Gloves 134.95

All anvils are designed by Emerson. The entire anvil is heat treated to 48 - 50c rockwell and made from 41/40 tool steel. All have 1" hardie hole and 9/16" pritchel hole. Ships Freight - Actual shipping charges apply. MADE IN USA

The wedge shape on this hammer is ideal for moving metal to your desired shape. Perfectly balanced – with the weight the same on the pein and flat sides to prevent the hammer from wanting to twist in your hand.

CAT.# EA100 EA150 EA200

DESCRIPTION

PRICE 955.00 1425.00 1795.00

CAT.# JP201 JP202

DESCRIPTION

PRICE 212.95 212.95

100lb. Emerson Anvil 150lb. Emerson Anvil 200lb. Emerson Anvil

1.75 lb. Cross Pein Hammer 2 lb. Cross Pein Hammer

1-800-351-8900

Page 49

JANTZ SUPPLY

WWW.KNIFEMAKING.COM