Jantz Catalog

WEST SYSTEM ★ DEVCON ★ PIGMENT ★ ACRAGLAS ★ EPOXY ★

Gorilla Glue

West System Adhesives

West System Pump Set

105/206 Epoxy

The adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. This PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. Water resistant & dries a natural color that offers an invisible bond line for your projects. Clamping Time: 20–30 minutes for room temperature applications.

Note that clamping time can be dependent on temperature, humidity, and the porosity of the wood. Cure Time: 24 hours. Size 4 oz. CAT.# DESCRIPTION PRICE GU62003 Gorilla Glue 4 oz. 3.97 Acraglas and Acraglas gel provide the professional or amateur with an easy to use superior bedding compound, specifically designed and manufactured to make your rifle shoot more accurately. Also great to use as a fill-in for stone material “inclusions” or cracks. Fills cracks and blemishes in wood knife handles, works as an epoxy to hold handles on. Bedding Compounds

WEST SYSTEM epoxy cures to a high-strength plastic solid at room temperatures, by mixing 105 liquid epoxy resin and 206 hardener in a 5:1 ratio. Designed specifically to bond to a wide range of materials including fiberglass, many metals, wood fibers, reinforcing fabrics, foam and other composite materials. This highly moisture-resistant plastic is highly recommended when extended working and cure time are needed or to provide adequate working time at higher temperatures. The 206 slow-cure hardener has a working time of 90 to 110 minutes at 70°F with a minimum cure temperature of 60°F. Cure time for maximum strength is 1-4 days. West Epoxy is easy to sand and shape when cured and does not shrink after curing. Can Not Ship Air.

Designed for convenient and accurate metering of #105 resin and #206 hardener. Calibrated to delivery approximately 0.8 fl oz of resin / hardener with one full stroke. Set contains one resin pump and two hardener pumps which mount directly on the containers eliminating mess and waste. Read and follow priming, ratio verification, and operating instructions included with pumps.

CAT.#

DESCRIPTION Pump Set Only

PRICE

WE300

26.79

West System Color Pigments

Epoxy based liquid colorants used to tint epoxy mixture and provide an even color base for the final finish system. Add to mixed resin/ hardener at a rate of approx. 1 tsp of pigment to 8 fluid oz

CAT.#

DESCRIPTION

PRICE 49.97 110.78

Gel

WE105A WE105B WE206A

1 qt #105 Resin

.98 Gallon #105 Resin .44 pt #206 Slow Hardener 30.88 WE206B .86 Quart #206 Slow Hardener 66.20

G/Flex ® Epoxy

Acraglas shrinks less than 1/10 of 1%, strengthens wood, simplifies inletting in semi inletted stocks, slow set-up allows ample time to seat barrel & action. Acid and water proof, seals inletting. Acraglas Gel has all the features of Acraglas, plus it shrinks slightly less and the butter smooth consistency prevents runs and mess. Kits contain everything needed to bed 2 rifles or lots of knife handles. Can Not Ship Air. CAT.# DESCRIPTION PRICE BWA Acraglas Kit 26.99 BWAG Acraglas-Gel Kit 36.99

epoxy. More pigment increases opaqueness and mixture viscosity. One 4 fl oz bottle will tint approximately 1-1/2 gallons of epoxy.

CAT.#

COLOR PIGMENT

PRICE

WE5018 WE5028 WE5038

24.50 24.50 24.50

White Black Gray

System Three

Epoxy Paste Pigment

G/flex epoxies are toughened, resilient two part epoxies engineered for superior grip to metals, plastics, glass, masonry, fiberglass, and difficult to bond woods. G/flex epoxies make bonds that absorb the stresses of expansion, contraction, shock and vibration. Easy-to-use 1:1 mix ratio gives you 46 minute pot life and a working time of 75 minutes at room temperature. Initial cure in 3-4 hours with workable cure in 7-10 hours.

Epoxy

CAT.#

DESCRIPTION

PRICE

WE6551 WE6508 WE6558

22.95 32.11

G/Flex Syringe 1 oz. G/Flex Liquid 4 oz.

G/Flex Pre-Thickened 4.2 oz. 33.99

Pure, dry, colored pigments can be used alone or mixed to produce additional colors to suit any project where color is desired. Add the paste to the epoxy resin then measure that mixture in the proper ration with the hardener. Use a maximum of approximately 10% volume pigment paste to combined resin and hardener. To maintain the same color over several projects, mix a master batch of color with resin and store for later use – only add hardener when you are ready to use.

Devcon Epoxy in the Dev-tube, gives you correct amounts of resin and hardener automatically, no measuring required. The high-strength 2-ton epoxy is waterproof, bonds wood, metals, Micarta, G10 and stag, virtually any knife part with a crystal clear finish that cures at room temperature in about 30 minutes. Made to withstand high impact and high-stress situations. The five minute epoxy has the same features as the 2-ton, but sets up much faster with only slightly less strength and is water resistant. Can Not Ship 2-Ton Epoxy Air. CAT.# SIZE DESCRIPTION PRICE DVE5 1 oz. 5 Minute Syringe 5.95 DVE3 1 oz. 2-Ton Tubes 3.75 DVE30 1 oz. 2-Ton Syringe 5.95 DVE33 8.5 oz. Total 2-Ton Bottles 16.95 DVE59 8.5 oz. Total 5 Minute Bottles 17.95

5 Minute Adhesive

CAT.# SE12 SE22 SE32 SE42 SE52 SE62 SE72 SE74

COLOR White Black Brown Blue Yellow Green

SIZE PRICE

Easy-to-use, fast curing epoxy system for quick repairs, tooling and general bonding. Use for spot application to hold parts in place while standard epoxy bonds cure. Bonds to wood, fiberglass, and metal. 1:1 mixture. Cures in 3-5 minutes. 4 fl. oz resin and 4 fl. oz hardener.

19.44 19.44 19.44 19.44 19.44 19.44 19.44 27.95

2 oz. 2 oz. 2 oz. 2 oz. 2 oz. 2 oz. 2 oz. 4 oz.

Red Red

CAT.#

DESCRIPTION 5 Minute Adhesive

PRICE

WE8654

30.32

1-800-351-8900

Page 77

JANTZ SUPPLY

WWW.KNIFEMAKING.COM