Jantz Catalog

USA MADE ★ VISES ★ PANAPRESS ★ BENCH MOUNT ★ TILTING JAWS

Kant Twist Clamp

This unique vise swivels a full 360 degrees and then locks in place when the jaw is tightened. Mount sideways for versatility. Jaws measure 3 1/2" wide x 2 1/8" high and open to 9" capacity. This is the perfect knifemakers vise. Optional cushioned lined tilting jaws pivot to easily hold tapered material. Holes in jaws allow easy mounting of cushion faces. Standing 9" tall, 11" long and 3 1/2" wide, the base has a three hole pattern to bolt to work bench or pedestal. The Base foot print is approximately 5" x 6". Versatile Knifemakers Vise

Bench Mount Clamp & Vise Jaws

Clamp your standard PanaVise to any table or bench up to 3 7/16" thick. Four neoprene pads are included to add “anti-mar”, “anti slip” to base without excessive tightening of the clamping screw. Includes screws for mounting the PanaVise base to clamp. CAT.# DESCRIPTION PRICE PV311 Bench Mount Clamp 54.99 PV343 Nylon Jaws 3.99 PV352 Teflon Hi-Heat Jaws 16.99 PV354 Non-Mar Brass Jaws 16.99

These clamps are a must when gluing handles or soldering guards or bolsters to your blade. The round handle on the Kant Twist clamps provide the ability to finely adjust the clamp pressure to your project and makes it easy to position your work. Clamps are small and light weight. The free-floating jaws adjust to unparallel surfaces, will not walk or twist when pressure is applied. Outside measurements and nominal clamping pressure of each clamp is as follows: CL400 is 1 3/8" x 1 1/2" 200 lbs.; CL401 is 1 3/4" x 2" 350 lbs.; CL403 is 3" x 3 3/16" 600 lbs.; CL405 is 3 1/4" x 3 1/2" 800 lbs. The clamp opening determines the thickest material you can clamp, the clamp depth is the maximum distance you can clamp from the edge. CAT.# OPENING DEPTH PRICE CL400 3/4" 3/8" 22.95 CL401 1" 1/2" 24.95 CL403 1 1/2" 1 1/8" 42.95 CL405 2" 1 1/8" 49.95

PanaVise Jr. uses the famous PanaVise design that tilts, turns, twists and rotates. One quick turn of the control knob and you securely position your work exactly where you want it. Overall height is 6 3/4", weighs 1 lb. 4 oz., head rotates and swivels 360°, pivots 210°.

Jaws are 1" wide and 2" high, opens 2 7/8" and are made of fiber reinforced thermal plastic alloy. Will withstand continuous heat up to 350° F (intermittently up to 400° F.) CAT.# DESCRIPTION PRICE PV201 PanaVise Junior 36.99

Steel Hand Vise

The Versatile Knifemakers Vise can also be mounted on its side, as shown above, then flipped over 180° to work from the other side. Can be mounted on corner of workbench to enable you to rotate a larger arc for long blades that go all the way below the top of the workbench.

Multi-Purpose Holder

The double action jaws on the Self Centering Extra Wide Opening Head allow fast opening and closing. The self centering feature permits holding heavier objects because weight is centered over

CAT.# JS315 JS316

DESCRIPTION

PRICE

Versatile Knifemakers Vise 114.95

31.00

Optional tilting jaws (pr.)

Great for holding small objects when polishing. Spring action in handle keep jaws open. 1-1/4" wide serrated jaws open to 7/16". Overall length is 3-3/4". CAT.# DESCRIPTION PRICE GN815 Hand Vise 51.95

THE PERFECT VISE

All Parts for PanaVise products are interchangeable. The heads, bases, etc., can be used to mix & match for several different styles. Made in the USA.

the base. Featuring extra wide capacity, the jaws open to a full 9 inches (229mm). The jaw plates can be reversed to close together. Ribbed on one side and “V” grooved on the other, the reversible jaw pads firmly hold cylindrical or odd shaped items. Tray Base Mount is exceptionally stable and resists tipping. It has six non-marring, anti-skid neoprene base pads. CAT.# DESCRIPTION PRICE PV350 Complete Work Center 120.99 PV376 Wide Head Only 71.99

Knifemaker’s Contour Vise

Fully Adjustable!

Standard

Vacuum Base

PanaPress

The Standard PanaVise gives you a complete range of adjustments to suit your needs. With rotation through 360° and 180° tilt, PanaVise provides the perfect angle on any job. This vise opens to 2 1/4" with 15/16" throat. 2 1/2" nylon jaws can withstand continuous heat to 200°F. Head removes easily from base for additional use when grinding, polishing or drilling those hard to grip pieces. The Vacuum PanaVise has all the features of the Standard PanaVise with the added portability of a vacuum base. The powerful suction pad allows rapid setup on any smooth, non-porous surface. Very useful on machinery CAT.# DESCRIPTION PRICE PV301 Standard PanaVise 61.99 PV381 Vacuum PanaVise 87.99

Designed and built by an engraver and knifemaker. In just seconds you can hold knives securely for engraving and other detail work with this wonderful vise. Special chain-like linear jaws conform to unusual and compound shapes with ease. Lined with a special hard rubber ribbon, these jaws grip securely without high clamping force. The Knifemaker’s Contour Vise is totally adjustable for a wide range of widths and depths of knives. It mounts in any vise including all known engraving blocks. If you work on knives, get one…it’s a well-made bargain. CAT.# DESCRIPTION PRICE PV622 Contour Vise 109.95

The Precision PanaPress weighs less than 6 lbs. and stands 7" high. Featuring four nylon gibs for precision directional control of the reversible,

vertical ram, this hand arbor press exerts pressure up to 1/4 ton. Ideal for compressing and straightening pins in your knifemaking projects. CAT.# DESCRIPTION PRICE PV502 Precision PanaPress 219.99

1-800-351-8900

Page 92

JANTZ SUPPLY

WWW.KNIFEMAKING.COM