Jantz Catalog

NICHOLSON ★ MILL ★ BASTARD ★ RASPS ★ HANDLES ★ BRUSH

Mill Files

Half Round Files

Taper Files

Rounded on one side. Flat on the other. Used on concave and convex as well as flat surfaces. Backs of all half round bastard files are double-cut. The backs of all half round second cut files longer than 6" are double cut, the 6" files are single-cut. The flat sides of all half round files are double-cut. CAT.# LENGTH CUT PRICE CTN04795 6" Bastard 14.95 CTN04828 6" Second Cut 15.95 CTN04861 6" Smooth 15.95 CTN04896 8" Bastard 16.95 CTN04927 8" Second Cut 17.95 CTN04960 8" Smooth 18.95 CTN04995 10" Bastard 20.95 CTN05026 10" Second Cut 22.95 CTN05059 10" Smooth 23.95

Triangular shape files taper slightly towards the point. CAT.# STYLE LENGTH PRICE CTN14224 Slim 6" 6.95 CTN14665 Extra 6" 6.95 CTN15024 Double Extra Slim 6" 6.95

For sharpening mill or circular saws. Also for draw-filing and finishing metals. All sizes tapered slightly in width. Two square edges. Single-cut on sides and edges. This is the most used file in the industry and is usually considered a general purpose file.

Pillar Files

CAT.#

LENGTH

CUT

PRICE

CTN08354 CTN08385 CTN08416 CTN08497 CTN08529 CTN08560 CTN08642 CTN08673 CTN08704 CTN08737 CTN08768 CTN08799

8.50

6" 6" 6" 8" 8" 8"

Bastard

10.45 10.95 8.45 11.95 12.95 10.95 13.95 16.95 16.95 19.95 19.95

Second Cut

Smooth Bastard Smooth Bastard Smooth Bastard

Pillar files are similar in shape to hand files but only two-thirds as wide. Double-cut on two sides only. Edges do not cut. CAT.# DESCRIPTION PRICE CTN40281 8" X-Narrow 00 Cut 39.95 CTN31238 4" Regular 0 Cut 26.95

Second Cut

10" 10" 10" 12" 12" 12"

Second Cut

Long Angle Lathe File

Second Cut

Warding Files

Smooth

Flat Files

Thin rectangular shape, double cut on sides, single cut on edges. Use in narrow spaces where other files will not fit. CAT.# LENGTH CUT PRICE CTN16761 8" Bastard 16.95 CTN16827 8" Smooth 21.95

Enlarged close-up shows the unique pattern of narrow chip breakers created by steep and angled serrations. This maximum cutting surface design gives rapid removal and smoother finish. “Magicut” is a machinist’s all purpose file, which removes stock rapidly and leaves a smooth finish at the same time, thus eliminating the need for extra filing strokes. CAT.# LENGTH PRICE CTN07894 8" 14.50 CTN07917 10" 17.95 CTN07941 12" 23.95 Flat files are used by machinists, machinery builders, ship and engine builders, repair men and others who require rapid removal of metal. They are rectangular in cross section and taper slightly towards point in width. Double-cut on both sides, single-cut on both edges. CAT.# LENGTH CUT PRICE CTN03566 8" Bastard 12.95 CTN03599 8" Second Cut 13.95 CTN03632 8" Smooth 14.95 Magicut Files

Cut faster than regular mill files and leave a smoother finish. Bastard cut. Edges do not cut. All long angle files are single-cut. CAT.# DESCRIPTION PRICE CTN07688 12" Long Angle Lathe File 23.95

Wood Rasps

2 in 1 Bastard/Smooth File

Great for the rapid removal of wood. CAT.# LENGTH

PRICE

CTN19427

24.95

10" Half Round Bastard

American pattern flat file with bastard cut on one side and smooth cut on the other, providing aggressive material removal and precise finishing capability in one file. The ultimate solution for shaping. Rectangular in cross section and tapers slightly towards the point. Double cut on sides and single cut on edges. Special tooth construction reduces clogging CAT.# DESCRIPTION PRICE CTN21910 10" 2 in 1 Bastard/Smooth File 16.95 American Pattern Rasps

4 -In-Hand

This versatile tool is really four in one - with a file section and a rasp section on the flat side and a file section and a rasp section on the half round side. Every homeowner, garage man, boat builder and mechanic needs one. CAT.# LENGTH PRICE CTN18924 8" 15.50

Square Files

File Cleaning Brush

For filing slots, keyways and general surface filing. Tapered slightly towards point. Double cut. CAT.# LENGTH CUT PRICE CTN13081 8" Bastard 13.95 CTN13114 8" Second Cut 15.95 CTN13147 8" Smooth 16.50

Pattern maker's cabinet rasps. Narrow pattern. These are the rasps stockmakers use the world over for their shape and outstanding cutting ability. CAT.# LENGTH DESCRIPTION PRICE CTN18846 10" Second cut #49 54.95 CTN18861 10" Smooth #50 64.95

Nicholson makes this file cleaner, therefore you know it is the finest available. For general cleaning of file teeth, works great even on your finest cut files. Overall length is 10". CAT.# DESCRIPTION PRICE CTN21467 File Cleaning Brush 23.95

Round Files

Chain Saw Files

Principally used to file circular openings or concave surfaces. Tapered slightly towards point. This file is generally referred to as a rat-tail file. CAT.# LENGTH CUT PRICE CTN11716 6" Bastard 8.50 CTN11748 6" Second Cut 9.50 CTN11781 6" Smooth 10.50 CTN40651 6" 0 Cut 19.95 CTN40645 6" 00 Cut 19.95 CTN11904 8" Bastard 9.95 CTN11936 8" Second Cut 10.95 CTN11969 8" Smooth 12.50

This new round smooth chain saw file is a product of extensive research and development in the engineering laboratories of Nicholson. This new round smooth chain saw file is the smoothest-feeling, fastest cutting and best-finished. CAT.# LENGTH DIAMETER PRICE CTN01576 6" 1/8" 5.19 CTN01630 6" 5/32" 5.19 CTN01765 8" 3/16" 5.19 CTN01888 8" 7/32" 5.19 CTN01974 8" 1/4" 5.19

File Handle

Nicholson file handle with interchangeable cushion inserts to fit a full range of files. CAT.# DESCRIPTION PRICE CTN21474 File Handle 6.50

1-800-351-8900

Page 93

JANTZ SUPPLY

WWW.KNIFEMAKING.COM